|
Quantity
|
Price
|
||
|
|
|||
The digital heater (voskoplav) is intended for heating wax in granules, tablets, as well as in jars of 500 grams of a standard size. It has an additional silicone container for hot wax in tablets or granules or for paraffin.
A handy and versatile wax melter with temperature control, suitable for professional and home use. It has a compact size, good design, equipped with a temperature controller and an indication of heating indicators, with which the process becomes even easier.
Granules for hair removal Hillary Epilage Premium Gold - Hot wax premium. It has a luxurious golden color and a special formula with hypoallergenic ingredients and oils for better steaming of the skin and, as a result, for perfect removal of even the shortest hairs. The special formula is suitable for oil work.
Wax, when heated, releases a delicate aroma, will give a pleasant Spa-procedure.
The granules quickly melt at a temperature of 38-40 degrees. Wax ideally lays down with a thin film, allows you to capture wide areas for removal, reducing the time of the procedure.
The set includes:
Voskoplav digital jar Hillary Professional Wax Heater;
Granules for hair removal Hillary Epilage Premium Gold, 100 g.
Mode of application:
Place the wax on a flat surface, next to which the epilation procedure will be performed.
Place the silicone bowl inside the wax maker, then add the wax/sugar paste to it.
Connect the wax melter to the mains, the screen will display OFF. Turn the temperature control clockwise to turn on.
The return switch can be rotated 360° to adjust the temperature. The return switch is sensitive. The temperature can be adjusted by one turn of the gear, one turn is 1℃. Quickly turn the switch to quickly set your desired temperature (Temperature range is 35-125℃.)
Wait until the mass is evenly melted (about 15-20 minutes). Cover the wax to speed up the process.
After reaching the set temperature, the mode of maintaining the optimal temperature will turn on. Set a different temperature if necessary.
Start the epilation process.
Apply the resulting mass to the problem area in the direction of hair growth. Then wait 5-6 seconds until it cools completely and pluck in one motion against hair growth.
After completing the procedure, turn the temperature control knob counterclockwise, when the temperature is adjusted to the lowest (35 ℃), turn one or more turns counterclockwise to turn off the device.
Disconnect the device from the network.